JOINT DEVELOPMENT AGREEMENT
Published on May 15, 1996
EXHIBIT 10.23(g)
ADDITIONS TO ATTACHMENTS TO JOINT DEVELOPMENT AGREEMENT
This is to confirm that ADVANCED MICRO DEVICES, INC. and FUJITSU LIMITED have
agreed upon the below-listed Additions to Attachments to the Joint Development
Agreement between both parties dated March 26, 1993:
First Addition re Memory Cards (PC) to each of the Attachments A, B and C
to the Joint Development Agreement.
Second Addition re Memory Cards (PCMCIA-ATA) to each of the Attachments A,
B and C to the Joint Development Agreement.
All the above-listed Additions mutually agreed upon are set forth in the eight
pages attached hereto.
ADVANCED MICRO DEVICES, INC. FUJITSU LIMITED
/s/ Clive Ghest /s/ Hirofumi Takeda
----------------------------- ------------------------
Name: Clive Ghest Name: Hirofumi Takeda
------------------------ -------------------
Vice President
Title: Clive Ghest Title: General Manager
----------------------- ------------------
Date: February 27, 1996 Date: December 20, 1995
------------------------ -------------------
- -------------------------------------------------------------------------------
Confidential portions of this document have been deleted and filed separately
with the Securities and Exchange Commission pursuant to a request for
confidential treatment.
- -------------------------------------------------------------------------------
ATTACHMENT A TO
JOINT DEVELOPMENT AGREEMENT
---------------------------
FIRST ADDITION--MEMORY CARDS (PC)
---------------------------------
This First Addition is for the joint development of Memory Cards (described in
the Technology Cross-License Agreement). These Memory Cards will be designated
as PC (Personal Computer) Cards which will use software drivers and Flash file
management software, and currently are designated as D-series. The D-series
Memory Cards will utilize the [CONFIDENTAL INFORMATION OMITTED AND FILED
SEPARATELY WITH THE SECURITIES AND EXCHANGE COMMISSION] Flash Memory Products.
[CONFIDENTIAL INFORMATION OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND
EXCHANGE COMMISSION] It is contemplated that design, development, test and
evaluation work will be carried out by either AMD or Fujitsu as will be
designated by the Joint Development Committee as appropriate. Both parties will,
at the request of either party, discuss joint development of PC Cards other than
D-series.
Joint Development Committee:
Fujitsu Initial: H.T. Date: 2/12/95 AMD Initial: /s/RCG Date: 2/27/96
----- ------- ------ --------
19A
ATTACHMENT B TO
JOINT DEVELOPMENT AGREEMENT
---------------------------
FIRST ADDITION--MEMORY CARDS (PC)
---------------------------------
This First Addition describes the design information for these PC Cards to be
developed and exchanged so AMD and Fujitsu (and/or their respective
Subsidiaries) will both be able to manufacture or have manufactured these PC
Cards.
A. ASIC Product Specifications
a) Catalog specification including Card Datasheet
b) Architectual information
B. Design Data
a) Circuit diagrams and Schematic layouts
b) Layout data supplemental information
c) Functional Block specifications
d) Configuration & Control Registers
e) Net List
C. Device Evaluation Data
a) Functional test results of sample cards
b) Electrical characteristics of sample cards
c) Reliability data of sample cards
d) Control parameters and their tolerance
e) Test specifications
f) Test programs
D. Software Drivers - Preliminary List
a) SystemSoft - MTD
b) Award - MTD
c) Phoenix - MTD
d) SCM-FTL filesystem support
e) Datalight - FFS/FTL filesystem support
f) Data I/O - PSX programmer support
[CONFIDENTIAL INFORMATION OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND
EXCHANGE COMMISSION.]
Joint Development Committee:
Fujitsu Initial: H.T. Date: 2/12/95 AMD Initial: /s/RCG Date: 2/27/96
----- ------- ------ -------
20A
ATTACHMENT C TO
JOINT DEVELOPMENT AGREEMENT
---------------------------
FIRST ADDITION--MEMORY CARDS (PC)
---------------------------------
D-Series:
- ---------
Item Phase Start Date Completion Date
- ---------- ---------- ---------------
Specification [CONFIDENTIAL INFORMATION DELETED AND FILED
Development SEPARATELY WITH THE SECURITIES AND EXCHANGE
Prototype ASIC** COMMISSION]
Prototype Card
Software Drive
Qualification
*TBE: To be established
**ASIC: Application Specific Integrated Circuitry
Joint Development Committee:
Fujitsu Initial: H.T. Date: 2/12/95 AMD Initial: /s/RCG Date: 2/27/96
----- -------- ------- --------
21A
ATTACHMENT A TO
JOINT DEVELOPMENT AGREEMENT
---------------------------
SECOND ADDITION--MEMORY CARDS (PCMCIA-ATA)
------------------------------------------
This Second Addition is for the joint development of Memory Cards (described in
the Technology Cross-License Agreement) containing controllers, application
specific integrated circuitry, and firmware. These Memory Cards will have all
pertinent software and manage Flash files on the cards. These Memory Cards will
be designated as PCMCIA-ATA (Personal Computer Memory Card Interface
Association-Advanced Technology Attachment) Cards.
[CONFIDENTIAL INFORMATION DELETED AND FILED SEPARATELY WITH THE SECURITIES AND
EXCHANGE COMMISSION] It is contemplated that product planning, design,
development, test and evaluation work will be carried out by either AMD or
Fujitsu as will be designated by the Joint Development Committee as appropriate.
[CONFIDENTIAL INFORMATION DELETED AND FILED SEPARATELY WITH THE SECURITIES AND
EXCHANGE COMMISSION]
19A
ATTACHMENT A TO
JOINT DEVELOPMENT AGREEMENT
SECOND ADDITION--MEMORY CARDS (PCMCIA-ATA)
Page 2 of 3
[CONFIDENTIAL INFORMATION DELETED AND FILED SEPARATELY WITH THE SECURITIES AND
EXCHANGE COMMISSION]
19A
ATTACHMENT A TO
JOINT DEVELOPMENT AGREEMENT
SECOND ADDITION--MEMORY CARDS (PCMCIA-ATA)
Page 3 of 3
[CONFIDENTIAL INFORMATION DELETED AND FILED SEPARATELY WITH THE SECURITIES AND
EXCHANGE COMMISSION]
PCMCIA-ATA Cards to be developed hereunder will utilize the [CONFIDENTIAL
INFORMATION DELETED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION] Flash Memory Products.
Both parties will, at the request of either party, discuss joint development of
PCMCIA-ATA Cards utilizing other Flash Memory Products.
Joint Development Committee:
Fujitsu Initial: H.T. Date: 2/12/96 AMD Initial: /s/RCG Date: 2/27/96
---- ------- ------ -------
19A
ATTACHMENT B TO
JOINT DEVELOPMENT AGREEMENT
---------------------------
SECOND ADDITION--MEMORY CARDS (PCMCIA-ATA)
------------------------------------------
This Second Addition describes the design information for these PCMCIA-ATA Cards
to be developed and exchanged so AMD and Fujitsu and/or their respective
Subsidiaries will both be able to manufacture or have manufactured these
PCMCIA-ATA Cards. Fujitsu shall negotiate in good faith with AMD about the
supply of components required to manufacture ATA Cards, and vice versa.
A. Product Specifications
a) Catalog specification including Card Datasheet
b) Device specification
i) PCB material used
ii) Gerber files
c) Architectural information
B. Design Data
a) Circuit diagrams and Schematic layouts
b) Layout data supplemental information
c) Functional Block specifications
d) ATA and Flash media interface
e) Configuration & Control Registers
f) SRAM Buffer Controller
g) Power management functions
C. MIcroCode and Firmware Code
Source Code for Firmware & Microcontroller code including:
a) Flash media file management
i) Copy, Erase, and Read functions
ii) Garbage Collection protocols
b) ECC implementation
D. Device Evaluation Data
a) Functional test results of sample cards
b) Electrical characteristics of sample cards
c) Reliability data of sample cards
d) Control parameters and their tolerance
e) Test specifications
f) Test programs
Joint Development Committee: Fujitsu Initial: H.T. Date: 2/12/95
----- --------
AMD Initial: /s/RCG Date: 2/27/96
------- --------
20A
ATTACHMENT C
TO
JOINT DEVELOPMENT AGREEMENT
---------------------------
SECOND ADDITION--MEMORY CARDS (PCMCIA-ATA)
------------------------------------------
Item Phase Start Date Completion Date
- ---------- ---------- ---------------
Specification [CONFIDENTIAL INFORMATION DELETED AND FILED
SEPARATELY WITH THE SECURITIES AND EXCHANGE
Development COMMISSION]
Prototyping
Qualification
Joint Development Committee:
Fujitsu Initial: H.T. Date: 2/12/95 AMD Initial: /s/RCG Date: 2/27/96
---- ------- ------ -------
21A